HTS708 dry ice cleaning machine is a cleaning machine applied in the field of automotive servicing, in which the dry ice particles are accelerated by the airflow at high speed to remove the carbon buildup. It can be used for the cleaning of carbon deposits in the engine compartment, cylinder combustion chamber, intake valve, throttle valve, and etc. With this cleaning technique, on the one hand, it can avoid production interruptions due to downtime, and on the other hand, disassembly and damage to the equipment can be reduced, which essentially protects the equipment and increases productivity. The cleaned dry ice will vaporize in the ambient, which is safe and residue-free and will not damage the vehicle. Dry ice is a non-toxic substance that will sublimate and gasify without any secondary waste residue; no reagents, no chemical components, and no secondary pollution concerns;it is friendly that will keep equipment safe and avoid harm to personnel. AUTOOL HTS708 can fully clean the carbon deposits in all parts of the car without disassembling the cleaning parts. This effectively reduces the cleaning time and greatly improves efficiency. This dry ice blasting machine is designed with an Intelligent microcomputer inside, which can precisely control the pressure. It can be optimally adapted to the cleaning task due to its adjustable control for air pressure and ice rate. Cleaning Time & Ice Consumption. Carbon Depostis AMT 3. Technician’s Skill A dry ice cleaning machine. AUTOOL HTS708 equipped with the trolley, smart control panel and universal wheel. It is convenient to use at garage or car repair shop. 1 Before carrying out the work, it is necessary to wear protective goggles, ear muffs, work clothes and gloves. 2 Before working, set the ice feed speed to “0”and check if condensate is blasted out of the nozzle 3 After finishing dry ice blasting, it is recommended to adjust the dry ice flow to “0”. Then turn on the blasting gun for 30s to eject all the dry ice in the ice tray and the dry ice tube without leaving any residue to prevent ice blockage. 4 It must be kept clean when adding dry ice, and no other foreign objects fall into the equipment. 5 This machine uses solid CO2 particles, and ventilation must be ensured when working. AUTOOL HTS708 dry ice cleaning machine adopts dry ice cleaning tech, which accelerates the dry ice particles through high-pressure airflow and impacts the deposits, thus removing the carbon buildup thoroughly. It can fully clean the carbon deposits in all vehicle parts without disassembling them as well. This reduces the cleaning time and greatly improves efficiency. Power supply: AC110V±10% 50Hz. Dry ice capacity: 7.5KG. Compressed air flow: >12.03/min. State of dry ice particles: 3mm. Air supply pressure: 0.31.0Mpa. Dry ice blasting amount (adjustable): 03.2Kg/min. Length of blasting hose:3.3 meter. Machine size:915 x 625 x 455mm. 1pc HTS708 Dry Ice Blasting machine. 1pc A pair of gloves. 1pc A set of fitting of blasting gun. (Flathead pipe, 50cm bent pipe, 35cm bent pipe, 35cm straight pipe, 50cm straight pipe). For damage caused by non-human factors, AUTOOL promises to resend parts for free within 3 years. Does this machine produce dry ice? Where do I get the dry ice from? No, it doesn’t produce the dry ice. It is dry ice cleaning machine, not dry ice maker. What size and form of dry ice required to use on the machine? Use the small granular dry ice is ok, the machine will crush the dry ice. What’s the pressure PSI does the machine need to run properly? What cfm the machie run on? Does this dry ice cleaning machine need to wok with. Yes, It needs to be used together with an air compressor. Compressor requirements: The air pressure requires 6BAR or more and the gas storage tank requires 300L; Air compressor power 7.5KW. We are a professional worldwide Professional company. We are reliable supplier to both wholesalers and retail sellers. We supply many products on Automobile consumer. Also offer reasonable prices, excellent customer service and a reliable credit standing are our target! All messages be reply within 24 hours. Welcome your any-time parchase! This item is in the category “Business & Industrial\Cleaning & Janitorial Supplies\Other Cleaning Supplies”. The seller is “cartools2019″ and is located in this country: US. This item can be shipped to United States.
- Brand: AUTOOL
- Manufacturer Part Number: AUTOOL HTS708
- Type: Dry Ice Blaster
- Vehicle Type: ATV, Heavy Duty/Commercial, Motorcycle, Passenger Vehicle
- Warranty: 3 Year
- Country/Region of Manufacture: China
- Power supply: AC110V/220V±10% 50Hz
- Compressed air flow: 1~2.0m³/min
- Air supply pressure: 0.3~1.0Mpa
- Package Weight: about 90KG
- Machine Size: 915mm*625mm*455mm
- Dry ice capacity: 7.5KG
- Application 1: rubber, casting, automobiles, ships, electric power
- Application 2: chemicals, printing, plastics, food, pharmaceuticals,aviation
- Equipment Type: Commercial Trash Can
- Parcel: Wooden Box